Iron-on transfers
Iron-on vinyl in matte, neon, glitter or metallic
Names, words, numbers and ready-made designs, cut from heat-transfer vinyl: a thin coloured film with a heat-activated glue on the back. I cut each one to order, pick out the spare vinyl by hand and post it flat, ready to iron on at home.
Rather not iron it yourself? Choose a T-shirt or hoodie and I'll press it on for you. I make personalised gifts too: mugs, ornaments, cushions and more.
Three ways to start
Where would you like to start?
Every transfer is cut from the same vinyl. Pick the way that suits what you have in mind.
Your own wordsType a name, a date or a line and see it as you go.Open the designer →
Names and numbersA name and number for the back of a team shirt.Open the designer →
Ready-made designsPick a design and change the words if you like.See the designs →
Or let me press it on for you
The look
Matte, neon, glitter or metallic?
Matte is the everyday favourite and copes with the smallest letters. Neon shouts, glitter sparkles, metallic catches the light.
Colours for each finish are shown in the options on every design. Ready-made designs in glitter start at 15cm wide.
Got a heat press? Here are the settings
| Finish | Temperature | Time | Peel |
|---|---|---|---|
| Classic Matte and Neon | 140-150°C | 8-10 seconds | Hot or cold |
| Glitter | 150-160°C | 12-15 seconds | Warm or cold |
| Metallic | 140-150°C | 7-10 seconds | Cold |
Firm, even pressure. If the vinyl starts to melt, drop to 140°C and shorten the time.
In the envelope
Everything you need, bar the iron
- 1Your design, already cut, with the spare vinyl picked out
- 2Held on a clear plastic sheet, so every letter stays in place
- 3Posted flat in a stiff envelope, so it doesn't crease
- 4A printed card with the same ironing and washing steps you see below
At home
On in about two minutes
Your iron and a sheet of baking paper are all it takes.
Cotton or linen setting, steam off. Work on a hard, flat surface like a worktop, not an ironing board.
Iron the spot for 10-15 seconds to smooth out any creases.
Clear plastic side up, exactly where you want it.
Lay the baking paper over the top.
Press down firmly for 15-20 seconds. Don't slide the iron, and don't overdo the heat.
Wait 5-10 seconds, then peel the plastic away slowly from one corner.
One last press: put the baking paper back and press for 5 seconds. It gives a smoother finish that lasts longer.
Got a heat press? Here are the settings
| Finish | Temperature | Time | Peel |
|---|---|---|---|
| Classic Matte and Neon | 140-150°C | 8-10 seconds | Hot or cold |
| Glitter | 150-160°C | 12-15 seconds | Warm or cold |
| Metallic | 140-150°C | 7-10 seconds | Cold |
Firm, even pressure. If the vinyl starts to melt, drop to 140°C and shorten the time.
Before you buy
Will it work on my top?
A crossed-out iron on the label, or sportswear with a coated or very stretchy finish, means the transfer won't stay on. This is what that looks like:
Fabrics it loves, and fabrics to skip
Also not for wool, nylon, lace or leather.
In every order
A little heart to try first
- Look at the care label: an iron symbol is fine, a crossed-out iron is not.
- Iron the small test heart onto a hidden spot, like the inside of a hem.
- Happy with it? Put the real transfer on.
If it goes on a fabric to skip, or the steps aren't followed, that isn't a fault in the transfer. If the transfer itself is faulty, I'll put it right. This doesn't affect your legal rights. Returns and refunds
Wash and wear
Multi-buy
The more you order, the more you save
Mix any designs, sizes and finishes: a name for each child, or a top for everyone at the party. The saving comes off automatically at checkout, and you still pay postage once.
Questions
Good to know before you order
Which finish should I choose?
Classic Matte suits most things, including small letters and fine script. Neon is for names that need to be read from a distance, glitter for bold letters that sparkle, and metallic for a mirror-like shine.
Do I need a heat press?
No. A household iron does the job. If you have a press, the settings for each finish are in the materials guide above.
Can you press it onto a T-shirt for me?
Yes. Choose a T-shirt or a hoodie with your design, and I press it on before I post it.
I spotted a typo after ordering. Can you fix it?
Email me straight away at info@denmary.co.uk. If I haven't cut it yet, I'll change it. Orders often go to the cutter within minutes, so the sooner the better.
It didn't stick, or the edges lifted in the wash. What now?
It doesn't happen often, and a second press usually fixes it. If it didn't stick, cover it with baking paper and press firmly for 15-20 seconds on a hard surface. If the edges lifted after washing, cover it and press for 5 seconds. Still not holding? Send me a photo of the transfer and the care label, and if the transfer is at fault, I'll send you a new one or refund you, whichever you prefer.
Can I iron it onto something that isn't clothing?
Yes, as long as it's cotton, polyester or poly-cotton and it can be ironed. Tote bags, aprons and cushion covers all work.